Fire safety remains an important part of protecting any home. Ajax supplies a range of residential fire detection products that can warn occupants when signs of fire or harmful levels of carbon monoxide are detected.Detecting Changes Before a Fire DevelopsAn early warning can give people more time to respond if dangerous conditions develop inside a property. Ajax offers different fire detectors for residential use, with each model designed to monitor specific risks.The Ajax FireProtect 2 RB (Heat) Jeweller is designed to detect changes in temperature. It uses two thermistors that respond to the surrounding temperature by changing their electrical resistance. This allows the device to identify high temperatures and sudden rises in temperature that may be associated with a developing fire.Heat detection can be useful in areas where other forms of detection may be affected by the conditions in the room. If the FireProtect 2 recognises a dangerous temperature increase, the built-in siren sounds to warn people inside the property. This can give residents more time to respond and leave the building safely if required.The detector can also be linked to a compatible Ajax hub. Once connected, users can receive alerts and access system settings through the Ajax app. This gives homeowners another way to keep track of their fire detection equipment and receive information about the system.Monitoring Carbon Monoxide as Well as HeatCarbon monoxide is another serious risk that can affect residential properties. It can build up inside a home without any clear visual warning or smell.The Ajax FireProtect 2 SB (Heat/CO) Jeweller monitors both temperature changes and carbon monoxide levels. It uses two thermistors for heat detection and also contains a chemical carbon monoxide sensor that checks the surrounding air for unsafe concentrations of CO.Carbon monoxide can be produced by faulty or poorly ventilated fuel-burning appliances, as well as by certain fires. Because the gas is colourless and odourless, occupants cannot reliably detect it without suitable equipment.When carbon monoxide is inhaled, it attaches to haemoglobin in the blood and reduces the amount of oxygen that can be transported around the body. Exposure to high levels can cause serious illness and can be fatal. The FireProtect 2 SB (Heat/CO) Jeweller is designed to sound an audible warning when dangerous levels of carbon monoxide are identified.Choosing Fire Detectors for Different RoomsFire safety needs can differ throughout a residential property. Rooms such as kitchens, hallways, bedrooms and areas containing fuel-burning appliances may present different hazards. This means a single detector type may not be suitable for every part of the home.The position of each detector also needs to be considered carefully. Devices should be installed where they can identify signs of danger and warn occupants effectively. Homeowners should follow the manufacturer's fitting instructions and relevant UK fire safety guidance when deciding where detectors should be placed.Regular checks are also important. Fire and carbon monoxide detectors should be tested at suitable intervals, with batteries, warning indicators and system connections checked for any signs of a problem.Residential properties can contain several potential fire risks, including electrical equipment, rechargeable devices and household appliances. Installing suitable detection equipment can give occupants valuable warning time if dangerous conditions begin to develop.Ajax offers a range of residential fire detection products, including models for heat and carbon monoxide detection. Choosing detectors that match the risks within different areas of your home can help provide an effective early warning system.View the Ajax residential fire detection range and other home fire safety check here products through the Firesense website.